Views: 1789 Author: Site Editor Publish Time: 2023-02-21 Origin: Site
The main products of our company are oil-fired (gas-fired) boilers, fluidized bed boilers (coal-fired, biomass-fired), pulverized-coal fired boilers, corner-tube boilers (coal-fired, biomass-fired), various types of waste heat utilization boilers for waste and hazardous waste incineration, large intelligent control autoclave and other products. The company has an annual production capacity of more than 10,000 steam tons of boilers and 800 sets of pressure vessels.
1. It is forbidden to start the water pump without water (the water pump cannot idle).
2. The steam generator must use demineralized water treatment equipment. It is forbidden to use well water, river water and lake water. If there is no softened water treatment equipment temporarily, the generator must be thoroughly descaled with boiler detergent at least once a month. (Note: The loss caused by generator scaling due to unqualified water quality is not covered by the manufacturer's warranty).
3. It is forbidden to spray water and steam onto electrical components.
4. The generator pressure controller has been commissioned before leaving the factory. It is forbidden for users to raise the pressure controller by themselves.
5. During the use of the equipment, a special person must be responsible for it, and pay attention to the steam pressure in the heating cylinder at any time, which shall not exceed the "high" allowable pressure.
It is strictly prohibited to conduct maintenance under steam pressure or high temperature. When conducting maintenance or troubleshooting, the power supply must be cut off, and the pressure relief and cooling must be carried out to avoid accidents.
The above is Jiangsu Sifang Clean Energy Equipment Manufacturing's answer to this question. If you have any questions about other boiler related issues, please consult Jiangsu Sifang Clean Energy Equipment Manufacturing's online customer service or call 0516-85871846 or 0516-85532705. Jiangsu Sifang Clean Energy Equipment Manufacturing's professional technicians will answer your questions in time.
