In view of this problem, Jiangsu Sifang boiler suggests:1) When the distance from the site to the control room is long and the resistance of the connecting wire is large, if the voltage source signal is used for remote transmission, a large error will occur due to the voltage division between the wi

In view of this problem, Jiangsu Sifang boiler suggests:During welding, the gas in the molten pool fails to escape during solidification and remains in the weld, which is called pore.Causes: ① the welding material has not been baked or the baking does not meet the requirements, the welding wire is n

In view of this problem, Jiangsu Sifang boiler suggests:1. Vacuumize the kettle to reduce the oxygen content in the steamTry to shorten the time of entering and leaving the material truck; The vacuum shall be evacuated and the vacuum degree shall be properly increased before the steam is introduced.

The economizer of the boiler is generally arranged in the tail flue, and the flue gas temperature is low. When the industrial boiler is started or operated under low working conditions, it is easy to cause the flue gas temperature to be low, thus causing low-temperature corrosion of the tail heating

Regarding this issue, Jiangsu Sifang boiler believes that:1、 Condensate Precipitation Law:Each steam curing cycle of the autoclave goes through three stages of pressure (temperature), constant pressure (temperature) and pressure reduction (temperature). About 80% of the saturated steam in each steam