There is no refractory brick wall in the furnace of corner tube boiler, which is heated evenly. The membrane water-cooled wall produced by international standard, which has small thermal stress and fast heat transfer. Therefore, this type of boiler has rapid start-up, rapid temperature rise and stro

Corner tube boiler is easy to maintain and the furnace grate is easy to assemble and disassemble. If the furnace grate is damaged in the boiler operation, it can be replaced at will without stopping the furnace. The membrane wall can be patched, and several rows of tubes need to be cut off every tim

The boiler is shipped in large pieces and assembled on site, which can shorten the installation cycle of the boiler and save the installation cost. The boiler has high thermal efficiency and easy operation, which greatly reduces the labor and electricity cost. As the boiler has no refractory brick w

Sifang Boiler adopts secondary air design. The main role of the secondary air is to disturb the airflow in the furnace and enhance mutual cooperation, so as to reduce the q3 and q4 heat loss without increasing the α. The use of the counter blowing of secondary air, can organize the vortex flow of fl

Design of membrane wall header without pipe joint. The membrane wall header without pipe joint design and installation site membrane wall piece inserted welding can reduce the pipe butt joint and flaw detection, and shortens the installation period.Horizontal water and fire tube boilers are also kno

The whole boiler is like a large container, with plastic sprayed steel plate or galvanized corrugated plate on the outside, and the color of plastic sprayed plate can be selected by the user. The boiler has high thermal efficiency and less chemical incomplete combustion loss. Due to the low flow rat

Tail heating surface:(1) Equal flow velocity variable cross-section design of the tail heating surface to ensure that the minimum smoke velocity of the flag heating surface is more than 6m/s.(2) The tail heating surface of each stage is reserved for soot blower interface and installation of soot blo

Our corner tube boiler has a fully enclosed membrane wall structure, with good sealing and small air leakage coefficient of the boiler. The boiler body adopts the latest round furnace door. The furnace door is an embedded furnace door, which is welded with the membrane wall around. It has good seali

Circulating fluidized bed boiler adopts circulating fluidized bed combustion (CFBC) technology, that is, the fuel is burned in fluidized state, and the materials flying out of the furnace are collected by the gas-solid separator and returned to the furnace for circulating combustion and utilization.

A boiler is a hazardous operation that integrates high-pressure vessels, pressurized pipelines, and special equipment. The safe and economical operation of the boiler, as well as equipment maintenance, play a crucial role in ensuring smooth operation and extending the service life of the boiler.1. S