In view of this problem, Jiangsu Sifang boiler suggests:1) When the distance from the site to the control room is long and the resistance of the connecting wire is large, if the voltage source signal is used for remote transmission, a large error will occur due to the voltage division between the wi

In view of this problem, Jiangsu Sifang boiler suggests:1. Vacuumize the kettle to reduce the oxygen content in the steamTry to shorten the time of entering and leaving the material truck; The vacuum shall be evacuated and the vacuum degree shall be properly increased before the steam is introduced.

In recent years, with the expansion of coal application scope and the enhancement of people's environmental protection awareness, circulating fluidized bed boiler, as a main "clean combustion" device, has been widely used, which shows its strong development momentum. For the selection of wear-resist

The economizer of the boiler is generally arranged in the tail flue, and the flue gas temperature is low. When the industrial boiler is started or operated under low working conditions, it is easy to cause the flue gas temperature to be low, thus causing low-temperature corrosion of the tail heating