Large-scale circulating fluidized bed boilers, gas boilers, biomass boilers, waste heat boilers for waste, hazardous waste, non-ferrous metals, CDQ and other waste heat boilers, R&D and manufacturer of new intelligent control autoclaves
Large-scale circulating fluidized bed boilers, gas boilers, biomass boilers, waste heat boilers for waste, hazardous waste, non-ferrous metals, CDQ and other waste heat boilers, R&D and manufacturer of new intelligent control autoclaves
Brief analysis of boiler operation precautions in industrial boiler manufacturers
Views: 0 Author: Sifang Boiler Publish Time: 2017-11-13 Origin: Site
With the decrease in temperature, industrial boilers, as the main equipment to meet domestic heating needs, have gradually entered the peak period of use. The manufacturer uses this to ensure that the equipment can operate normally during the operation period.
When the industrial boiler is not in operation, the industrial boiler manufacturer recommends that the user close the water valve, gas valve, power supply, etc. to the industrial boiler one by one; Always pay attention to the water injection pressure. In addition, do not arbitrarily change or disassemble the flue of the industrial boiler; if you want to use the industrial boiler to provide hot water in summer, you can adjust it to the summer mode, so that you can only supply hot water without heating, but don't forget to turn the water out of the boiler When the temperature is set, turn on the hot water directly at the water point. The operation points of the industrial boiler in the non-operation period are basically these, and its operation items in the operation period have also been introduced. Next, let’s take a look at some configurations of the industrial boiler itself, which are inconspicuous but often very important. indispensable. One is the slag retaining device of the industrial boiler. In order to prevent the slag from falling into the grate and prolong the residence time of the slag on the grate, the chain grate should be equipped with a slag retaining device.There is also a tensioning device for the industrial boiler grate, which is designed to prevent the grate from arching during operation. The industrial boiler manufacturer pointed out that since the grate must be tight during the operation of the industrial boiler, the tensioning device has become one of the indispensable accessories. The chain belt type relies on the front axle and the rear axle to tension the chain. Generally, the front axle It is adjustable; the beam and scale type are tensioned by their own weight, so that the grate can maintain a stable operation.